【車全面プリントで○○万円！】この巨大マシンがヤバ過ぎる★全塗装・デジタルペイント　軽～大型車すべて可能

【車全面プリントで○○万円！】この巨大マシンがヤバ過ぎる★全塗装・デジタルペイント　軽～大型車すべて可能

Good morning, good morning, I’m in a slightly different place today. By the way, this facility is here. Yes, it’s Paint Max, so what video are you going to do today? I always take videos of that motorcycle, but it’s in a different department. So I

Opened a paint factory, so I’d like to introduce you a little bit, so that’s why I came here.By the way, the keyword is “motorcycle”, but we at Old Mac are a vintage Harley shop.I see, we usually make videos of vintage Harleys. It’s a channel I’m uploading, but it’s in a different section

Yes, everyone, please watch it later if you don’t mind. Let’s go. [Music] Let’s go here. Yes, that’s Kakegawa City, Shizuoka Prefecture. That 3-lane Katakawa along National Route 1. Atsushi: I have an American atmosphere, so I’ve put some hobbies into this as well.I’ve put my hobbies into

Work, and I’ve put my hobbies into work.I’ve used regular cars, light cars, and even large trucks and buses, and they’re long enough to fit in the factory, so they’re painted at the factory. The booth has 2 lanes, 2

Lanes, and 1 lane for digital painting.Yes, it is a work factory with a total of 3 machines.Yes, digital painting is a word that I am not familiar with . Today, we’ve included an explanation about that, so let’s head over to the building.Okay, this is digital painting.This frame-like thing

Is a digital painting machine.Yes, yes, just in case, here’s the entrance. So you go into the trailer, you go into the big trailer, you open that shutter, and the head of the trailer comes out over there and you can print out the whole thing.Yes, yes

, yes, yes, that digital paint can do a lot of these pictures. Print All of this Is that so? I’ve done all of this. I have a person in charge who is knowledgeable about this,

So I’ll introduce him to you. I’m Naoto. This is Naoto from the staff. Hello, hello. Naoto, but he actually appears on Old Max’s motorcycle channel a little bit. Well , I was actually helping out with some heavy lifting for import videos, etc. What is this room? This

Is an office. No, actually, the boss just came in at the entrance of the car, and the humans are in this small room. Okay, so you’re going to enter through the door, so I’d like to ask Naoto to explain a little bit about the digital printer, so I’d like to ask

Naoto first.Yes, the cars are making a lot of noise on the side of the national highway, so I’m going to go ahead and do this. Can I ask you to close this ? Okay, so for the time being,

We have come up with a few keywords like digital printing, auto body printer, and all-over painting, but what is the difference between this and auto body printer painting? What’s different from painting is a normal printer.What do you call it?It’s a printer.It sucks up paper.Yes, it

Has the same structure as a printer.It’s a car version.It’s ink that applies the colors. It’s a machine that uses an inkjet method to create CMYK 4 colors and sprays them directly on the car to print photos or designs.Yes,

Yes, I have a question for the boss, but printing photos is something that cannot be done with paint . If you have the artistic talent, there is a method called airbrushing, but there are limits. You can use airbrushing to paint the entire surface of a truck. It’s amazing. It never ends,

And it costs a lot of money. You can make it move in any way you like. I’ll move it, please . [Music] Now, it feels like I manually moved it back and forth from side to side. Yes, it’s basically faster than painting.

If I were to compare it, I’d say, painting it. If you dig it up, you can do it unmanned, but does that mean it’s faster than it would be if done by a human? Yes, that’s right, it can be said to take 0 hours. It’s an amazing machine. This is

Such a great machine. Is that so?There aren’t many places that have introduced this.This is very few.This is Shizuoka Prefecture.There is 23 on the Tobu Tube and there are no other places. There isn’t even a division, right? Well, I don’t think there was a

Place like Toyohashi. Yes, yes. If that’s the case, I wonder if that’s the scope of defense. So if you’ve been thinking that you have to go to the place I just mentioned, please come by. If you get to know us, we

Might be able to get a little closer.Well, in order to make it, what kind of process is necessary?First of all , create the data.Once you have the data, then yes, let’s say this is the data for this body. I need to take a picture,

So if it’s flat, I’d say about 123 points, so I ‘ll take it from about 3 rows above, and then that’s the end of the car body data, so I just decide on the starting position and press the button on my computer, and printing will start. After that, it’s unattended.If you

‘re painting a car, what do you do to prepare the car side? If you’re painting the whole car, you’re sanding the old paint and then painting it. The painting process is to attach the legs so that they are tangled, then fix any scratches, spray surfacer or something like that, and paint over it

. In this case, the paint is basically sprayed onto the painted areas, so there is nothing there.If you wipe off the dirt and oil that won’t stick to it, you

Won’t need to stick to it anymore, and the work process will naturally become easier. Well, there are many things that are a little easier, from ordering to finishing.For a truck, if you ask me to add patterns on both sides, how long will it take to finish?Basically,

If you think about it in one day, yes, I will paint both sides. So, how many hours does it take to coat one large side for 2 days? It depends on how you apply it, but it’s about 4 hours, and then it takes 4 hours for both sides,

Which means you can’t prepare, so you’ll have to spend 2 days. I mean, it’s going to happen, but if a truck like that is dropped off and returned to you in two days, it feels like it’s really fast.If you compare it to an airbrush, it’s a big difference,

Right?I heard that it’s a big difference in the price of Oil Max. I’d like to ask you something right away , but you can do it without materials.I can’t give you a guideline without materials.I can’t give you a guideline.I

Don’t know what stages there are, so my boss told me this, and the larger the area, the cheaper it is. In other words, as the unit price increases, the unit price becomes relatively cheaper, so if you go from large to large, it is about 500,000 yen for both sides

. If the groundwork is bad, it will be a different story.If the groundwork is bad, it is generally normal, unless there are large scratches or bad old paint, then wash it, degrease it, and remove the oil. There’s nothing better than removing the dirt and getting a clean base, so I

Called , got a quote, and proceeded with the process, and it turned out that it wasn’t worth 500,000 yen, so I didn’t have to think about it that much. Well , I don’t think there is anything like that plus alpha, but

I think there are times when the current printer is a print stand and, for example, a company wants to create a design without data, but do you mean the amount of design data? Is there such a thing? If the design is new,

It will take a long time if you don’t receive many, but for example, if you are a lucky company that has a large number of machines, you may be able to get discounts to some extent. I’ll do my best to include what I want to include.Yes, yes, yes.The amount of design.So

If you’re a new customer and you want me to design something on the whole side of the truck, you can do it from the design with Paint Max.That’s the amount of design. Have you decided how much it will cost? 30,000 yen for Heto Design.

Well , it’s not that big. Well, the size is this, and the design is done on a computer , so no matter how big it is, it’s the same. Yes, it’s because we have different tastes. I don’t think it’s relevant. Next, what

If you put a large wing vehicle on it? Next, for comparison, I’d like to see some materials for a 4t wing. I’d like to ask for a fee. Two medium-sized 4t wings cost 300,000 yen. It’s 200,000 yen less than 10,000 yen.This is simply a difference in size.It’s

Area, yes.Next, 4t is 2T, small 2T, but there are various sizes. The standard size of 2T is just 170,000 yen.170,000 yen.Is there anything else that needs to be done ?Also, it’s already 110,000 yen per square meter, so if it gets smaller and smaller,

I’ll keep changing the settings. It’s getting smaller and I can’t say 100 yen for this, so basically it’s like this: 1 meter x 1 meter is the minimum charge.Yes , this is only on the side of the truck.You can do it both in the back and in the back

. In terms of cars, what kind of pattern is it? Well, my sales person also made it flashy, but let’s take a look at it later. I painted it with the Every box program, but yeah, this is it. The masking on the aluminum part of the book is really good, so much

So that you only need about 1cm of masking, so it’s hard to beat Lumist. Well, if you’re talking about normal painting, that’s all there is to it, right down to that glass part. It looks like it’s going to block it, but if you pull that one masking mask,

It’s enough to cover up the parts that shouldn’t be sticking out.If you peel it off with a crawl, it’s very clear.I guess this is the pattern for the door, so I decided to make a signboard. I

‘m going to put up a signboard around here.I’m going to buy an iron plate, I’m going to cut it to size, and I’m going to print it.I’m going to print it using the same machine that Old Max uses.I’m going to cut off the corners and print it. Yes,

That means you can do things like make your own original signboards in your garage or something. In the second half, basically, that printer is resistant to unevenness, which is amazing.It means that

Even if you use a printer, you can apply corrugated plates with uneven wings, which would be quite annoying if you put them on with stickers, in one shot . Even with this corrugated board, the gap is about 1cm or so.For wrapping, it

Is common to print a signboard and stick it on, but if you want to make waves like that, print the length in that size. If you hang it up and paste it, it will shrink, right?

So, 1. When you print something like how many times it is, you have to make it smaller and then paste it . You have to do that calculation. Yes, yes, that’s it. No , this printer is already blowing just like that, so if you

Blow straight from the front, it will do that.There’s no need to put it on, and the wrapping is a bit like this.In terms of price, it’s almost half the price. That’s about the amount of money that we were able to achieve. Oh, that’s great. Also, that’s the tank over there. Harren. Ah, the

Bike’s tank. I heard that this was actually made with this machine. Yeah, it’s quite a small design as well. I can blow it without any problem, so of course this body printer is installed here in a stationary manner, so I can bring it to you

In a size that can be erected like this.If that’s what I said before, I’ll somehow be able to set it up here. Things like tanks and other things that you can’t do yourself, you can do for the most part. For example, when it

Comes to things at home, I think most of us probably have them. But yeah, it’s a blind, right? If I were to say that something like this would typically be wrapped, it would probably be difficult, almost impossible, and there would also be strings and strings attached, and there would be holes in it

. If you don’t, you won’t be able to get the feathers through, so something like this is perfect . Just apply it to the thread, and by the way, you can also make cloth. I also made a T-shirt. I can do it, isn’t it? It’s interesting,

Right? It all depends on the idea. Well, let’s go out for a bit. The salesperson, the very flashy salesperson I mentioned earlier, is this. I asked Naoto to do a little work on it, and it was completed. It was so flashy, so yeah, who’s going to ride this ?

Well, this is actually done with that machine. Yeah, that’s right. There’s one thing I’m particular about. Yes, this body is metallic silver, so yes, this one here. Well, what I mean by parts is the body in the picture.It

Looks like it’s candy painted to give it a metallic look.The color is applied through the silver, so when the light hits it, it also looks metallic. Yes, yes, yes, yes, yes, yes, this example is just a showy one, but it doesn’t mean that everything

Will turn out like this if you ask us to do the work. When I went to a company sales meeting, I was like, “This is how you can actually catch fish.” Well, I was able to show you exactly how I could catch a fish

. Looks like you were there.So are there any other cars out there? Yes, is this a 2T?This is a 2T.It looks like this, very vividly.This is also from our house.The photo of Olmax is in the background. I put the letters and

The logo on it, and I made a very simple design, and I blew it a little to try it out.It’s so easy that I can do this. The sides and back are already

In America, so if you ask this shop to do it, it’s going to be flashy.If you leave it up to them, it’ll turn out like this, but the more you look at it like this, the more dynamic they can do

Things that can’t be done with the painting process. In other words, I just left it to him to do it , and Dana Garage used the camper camper camper that Garage uses in their advertising. It’s flashy, I’ll put it here, right here, I’ll put it here.Okay,

But of course you can also make it plain.Yes, if you want it to be plain, then in the design process, then go back to what you like. Toku-chan just came to work next to me. Ah, he just came to work. What kind of painting was he doing? Yes, from Old Max. Yes, he

Was painting a customer’s motorcycle. Yes, on his motorcycle. What is this? Is this a video? Introducing the Maymax, this is the same. And then there’s a white line here, and then there’s the Harley-David logo, but this is on its way right now. Yeah, it’s

Just in front, right on the rear fender. Yes, I applied it earlier. It’s dry, so can I go? Yes, this big booth is this big. It’s really nice. It’s nice. It’s nice. It’s nice. It’s airbrush. It looks like it ‘s dry. By the way, is there any

Advantage to coming here instead of Old Max ? Is there something better about coming here instead of Old Max? There’s a hut , but there’s nothing that can’t be painted, but since this building was built, it’s stocked with everything, so the one who came here because it has a lot more stuff and

There’s not much distance to travel. It would be great if it was Kouko too, so I feel like I’m helping Old Max a little bit like this.Thank you for catching me just as I was about to go back.Thank you very much

. Jatoku-chan also ran into me earlier and was painting the tank, but To-chan was doing it here. Is it okay to do the 2nd one in the middle? The 2nd one was the 3rd one. What kind of work is he doing now

? I’m polishing it. Ah, is this a Volkswagen bus? Type 2 Type 2 Introducing Yes, I’d like an introduction [laughing] Are you a staff member? That’s painted. Yes, it’s Riwabiwa Parabo. It’s Habo. It’s Habo. He came himself. Mr. Pabo wasn’t there for a meeting. By the way, I’ve been painting

For a long time, I think it’s been about 20 years.It ‘s a wonderful and reassuring presence.As a shop, it’s a little small these days, but up until recently it was all large, so it’s gotten thinner and thinner. It’s hard

So, is it okay to say that it’s not thin? Well, it’s a rather small bus right now, so by the way, what kind of work did the big big thing do? The big thing is , yes, it’s a large container for worship. I’ve done some work on some of them, and I’m currently

Trying to get rid of some of them that have a lot of rust on them , and I’ve just finished refreshing some of them, and it must have been a lot of work. Well,

I used to be a regular user when it came to treating the base, so I tried it on large-sized pieces, and although it can be difficult to do that kind of thing, I can see how beautiful it turned out. When you look at Maso’s work, it looks amazing, and it

‘s a lot of fun considering the surface area.I guess the impact can’t be compared to the higher-ranking people , but here we are in the middle of the process. When I saw it, it was so huge that there were so many tosema and container buckets in this huge booth.It

‘s so big that I wonder when it’ll be finished.By the way, it looks like it’s already been painted. I’ve been asked to paint the bottom half, and I ‘m currently in the process of polishing it. Habo-san was explaining about the digital painting over there earlier, but it

Seems like they’re sharing the work themselves. That’s right.When a large print comes in, I come along to support them, but the main thing is painting this one, and on the other hand, I support this one, and I also help out with a little bit of help.By the way, in terms of facilities,

This is this. This is the filter on the wall.The main thing is to paint it.Suck up the painted mist and send it up to the sky.Here, return the fill filter and raise it up in the sky as clean air. It’s said that the smell disappears when the wind blows away,

So it’s like a warehouse.It’s like breakfast and there’s a lot of paint in there.I don’t know if anyone would want to see it, but I guess it depends on the purpose. I’m thinking that I’m

Going to divide it up a little bit and it’s going to increase more and more in the future , but this is what it looks like in the back.There’s a half-inch machine for paint, and it’s shaped like something that can be turned around automatically. Well, I think all normal paint shops

Have it, but yeah, that’s interesting.It feels like they ‘re offering cheap prices every morning.Thank you very much.You can also see what’s behind the scenes of this kind of job on YouTube. That’s good, right? There are people who have never seen this rotating machine. I’m sure

There are people who don’t know it, but they want to be seen here, so they’ll come right away. They came here to give me the signal to be shown. Thank you very much, Labo. Yes, thank you very much. Okay , so I’d like to

Have you try some fishing and try to catch something. [Music] Hey, [Music] Why are you coming back to this left one after another? Is this the nozzle that I use for printing? Yes, the cleaning liquid comes out from here and I use this sponge to clean it one by one.

Yes, yes , yes, yes, yes, yes, I’m washing it. I’ve come here many times to see it appear . [ Music ] It’s about the size of a cat, about 20 minutes, about 20 minutes. What are

The dimensions of what I’m smoking right now? The width is 880. Yes, the shield is 650. Weak ah, it’s really fast, isn’t it? Wow, I turned on this heater on the way , but I’m filming this winter, so it’s a little cold even now,

But I guess it’s better to keep it a little warmer. If the temperature is too high , the paint may not dry completely and drip, so I think it’s best to apply it regardless of the season, just to be safe.Yes, yes,

What is that right now?Measure the surface temperature. If it’s about 31°2° poop over there, it’s fine. If it’s over 30, then it’s fine . It’s mostly cars, and various things like the blinds I mentioned earlier. I’ve finished the general introduction of the facility as a whole.

It’s not very common for us to have both a paint printer and an auto body printer , right? That ‘s one of our strengths. I heard from someone that it seems quite difficult to paint the body color on a new car, then send it back to a sign shop, which is quite difficult.

I also have a website where you can check it out and follow me.I also have a home page, so if you use that, it has an email address and I also accept inquiries by email.Also, of course I also accept phone calls. Please, please, please, please marry me.Yes, I

‘m an Old Manx who doesn’t know the words to use.That’s wrong.That’s the difference.Everything in this video has been used.This is good.People who found this video interesting. Yes , please like, subscribe to the channel, and comment. Yes, thank you very much. Hasese ‘s Old Max A Paint [Music] Max

新しくOPENしたPaint MAXの紹介動画です！
車の全塗装やデジタルプリンターを使ったデジタルペイントを専門に行うお店です。
是非デジペンにできることを知って頂き、多くの方に利用していただけると嬉しいです。
—————————————————-
Paint MAX
静岡県掛川市領家1605-5
TEL：0537-64-6555
MAIL：info@paintmax.cc
公式HP：http://paintmax.cc/
—————————————————-

日頃、OLDMAX’Sチャンネルをご覧の皆様、
今週はハーレーから離れた内容であることご容赦くださいm(_ _)m
是非応援頂けますようよろしくお願いします★

Let’s enjoy the moment!!
———————————————————————————————–
静岡県掛川市のVintage Harley Davidson 専門のカスタムショップ「OLD MAX’S オールドマックス」です！
【instagram】→https://www.instagram.com/oldmaxs/

現在総車両台数50～60台ほどございますのでお気軽にご相談ください。
中部運輸局認証の整備工場にて直輸入車の展示販売を行っています。
OriginalStockからBobber・Chopper製作まで、お客様の理想像にプロの技を添えて楽しいHarley Lifeをご提案します。
エンジンオーバーホール＆保証付きですので古い車両でも安心してお乗り頂けます。

【掛川U.S.A.Village】通称”K.U.V”は
Vintage Harley Custom「OLD MAX’S」
グルメバーガーのアメリカンDINER「MAX’S DINER」
直輸入雑貨・アンティーク「RAINBOW LINE ANTIQUES」
グルメドッグ専門店「RAINBOW HOT DOGS」
の店舗から成る、複合テーマパークです。
【KUV公式HP】→http://usa-village.cc/
６０年代の古き良きアメリカを完全再現した施設は、
どこも写真映え最高！
ハンバーガーを食べつつアメリカを味わいにお越しください。

検索用ワード
#knucklehead #ナックルヘッド #panhead #パンヘッド #shovelhead #ショベルヘッド #flathead #フラットヘッド #ハーレーダビッドソン #チョッパー #アイアン #ヴィンテージハーレー