【4速フレームショベルヘッドチョッパー】シート完成披露

【4速フレームショベルヘッドチョッパー】シート完成披露

The seats for the 4-speed frame excavator chopper have been made, so I would like to ask the owner to sit on them and check them out.Please take a look at them ! This is amazing… These are the king and queen seats made for this

Bike.Owner This is the stage where I was making king and queen seats to match the 2018-2012 while sitting on them.Even though I wanted to create a good atmosphere in this area, it is still important that they hit the waist firmly and support the lower back, so

I also sit astride on these seats. Since the owner has a better physique than me, I decided to give him a little more room.Based on that, I decided to make the peaks and valleys clearly visible, but the width of the sissy bar and fenders was narrower. It’s no good if you overdo it.It

Has a wide glide and the tank is also a bit wide, so I created king and queen seats for this vehicle to match the overall atmosphere.What do you think ? Thank you. How are you feeling? – Yes, it looks really nice , and I made the back like this. – Thank you. I

Put this below the logo of our store and used this to fasten the back of the seat. It fits nicely. I think it’s been put together neatly and compactly. Then, let’s take it down once and let the bike straddle it. Wait a minute . It’s a bit narrow on this side, but

Don’t worry about the bike falling over if you climb up here and straddle it. I don’t have it, so what do you think? It’s very comfortable to sit on.The seat supports your lower back.It ‘s comfortable, right? -It’s very comfortable.My

Feet aren’t in the mid position and I have them in the front, but I think the seat is very comfortable for my feet.Yes , it’s extremely comfortable.The position of my hands is also similar to what I

Thought when I saw this bike. Some people say, “Isn’t it supposed to look like this because it’s a four-con engine?” But if you make the seat like this, you’ll have a lot of room here. Yes, I have an S&S air cleaner here, but

I’ll have to change the air cleaner to a smaller one. It’ll get better if you do, it’s big so it gets in the way and it’s a lot easier, right? -It’s quite easy, it’s much more comfortable than I expected.It gives off a great atmosphere.Really… the handlebars can be adjusted at all.I

Think it’s about right now, but now there’s plenty of room in the back too. – I see, are you okay? Yes, it is okay. -Really? It looks like it would be easy to run long distances. – That’s right. No

Matter how much I think about how to straddle it, the physiques are different, and I won’t know until the owner rides it. I’ve built it to a certain extent, but I think it’s really nice. I think, yes, I can probably sit there with plenty of room. There

‘s a lot more room in the back than I expected , so that’s really the owner’s specifications . I can sit on it, and it would be really comfortable if the king and queen seats were held firmly in place. Yes, it’s comfortable.Okay , please take my place.I’ll try riding the bike too.It

‘s okay if it’s slow.You want to see it, right? I want to see what happens if someone else straddles this.So by cutting the seat diagonally, the legs will come out like this, which will make it easier.After all, this is the real pleasure of making something original.

I put a lot of thought into making it.It’s very comfortable.There ‘s a lot of room in the back.This is really the owner’s specification.When you look at it from the front, it gives off a nice atmosphere, and when you ride it, it looks very dignified, and I think it’s a cool

Seat. Once it’s done, I feel like it turned out exactly as I had envisioned. I had a lot of trouble with the sissy bar, but in the end I found it to be just the right height. I think it’s the best height. I didn’t expect everything to fit together so neatly

. I wanted to give shape to the ideal I was looking for, so I did my best . Thank you very much. It’s nice, it gives a feeling of wide glide. It would be uncool if my legs looked like this, but

If it’s a long bike. That’s fine, but with this stock size, the front fork is 4 inches over and the wheels are 21 inches, which would be really cool if it were about that.Your feet can touch the ground with plenty of room, right? -Yes, it’s okay.This

Area is also made wider than the normal king and queen seat, so I made it a little wider here as well.While making the width wider, I thought about various things such as cutting off this side diagonally to make it easier to place your feet on. I’m making it and

It’s really comfortable to sit on.Now let’s think about what to do with the leather for this seat. That’s part of the fun of customizing, so let’s move on from here. – Please, are you okay? – Yes, thank you. It was worth making. Now,

Let ‘s move on to the rest of the work. – Yes, thank you.

今回は4速フレームのショベルヘッドチョッパーのシートが完成したので、
オーナーさんに来てもらい完成後初めて見てもらいました。　
実際にシートに座ってもらい座り心地など確認してもらいました。

MUSIC By: STRANGENESS

▶︎チャンネル登録はこちら: https://www.youtube.com/channel/UC0m-goHl7z1X2_IV9mQ5J_w?sub_confirmation=1
▶︎Instagram： https://www.instagram.com/revolt_custom_cycles/
▶︎Facebook ： https://www.facebook.com/masao.inoue.1426
▶︎オンラインショップ： https://revolt2013.base.shop　＊海外の方も購入出来ます
▶︎CONTACT US
【REVOLT CUSTOM CYCLES（リボルトカスタムサイクルズ）】
営業時間：10:00~20:00
定休日：月曜日、第３日曜日
住所：〒574-0064　大阪府大東市御領1-10-46
TEL/FAX：072-800-8851
​ WebSite : www.revolt-cc.com
E-Mail： info@revolt-cc.com
代表：井上　正雄

#shovelhead
#kingandqueen
#chopper
#harleydavidson