Insta360 Ace Pro専用アクセサリーで体験する、より良い動画撮影の秘訣

Insta360 Ace Pro専用アクセサリーで体験する、より良い動画撮影の秘訣

Hello, today I would like to introduce various accessories that can be used with this Instagram 360asPro.It’s a new camera, but accessories are being released one after another, and they look pretty good, so today I’d like to take a closer look . There are also accessories that can be used with

The Insta 360 GO3, X3, and GoPro, so if you don’t mind, please watch until the end.First of all , let’s take a look at the GPS preview remote, which I think everyone is most interested in. It comes in a package that looks like this,

So what’s inside?First of all, this is the main unit.Also, this is the plate that you use when charging.If you put the charger here like this, and it’s just the main unit. You can place it like this and charge it.It has a USBA terminal on the other side.So , remove it and go

To this case.It’s a case, or rather, this is a watch-shaped holder, so when you put it in this, you can put it in this. I wonder if it can be charged by attaching it like this when it is alone.The charging terminal has a magnet

So that it can never be attached in the opposite direction.It seems that it can only be attached in the correct direction, so there is another holder. It comes with a remote control , but it’s a rather thin pipe that can be attached to handlebars, ski poles, or selfie sticks.

Well, first of all, you need to start up the Instagram 360SPro and then pair the Bluetooth remote control.Once this is done, I’ll turn off the power for a bit, but the remote control will work even when the power is off. When the power is turned on , the Pro is also activated.

Yes, like this, you can preview the screen that is being transferred with this camera on this screen. This remote control is extremely multifunctional, so you can see it on this screen. You can now perform almost the same settings as you would with a camera.Of course, you can also switch the shooting mode

, change the resolution, frame rate, image stabilization, aspect ratio, and swipe from the side to set the shooting settings, such as color and manual settings. You can do all of those things , and since this is a zoom, you can also use 2x zoom if you press the zoom button.Furthermore, you

Can freely set the angle of view here, so this is the default screen . I mean, it’s like a clock screen, but if you swipe it sideways, you’ll see Dashboard Compass, and then Settings, where you can set various things, for example, start the camera

. You can also do things like setting whether or not this camera will start up when you start up this remote control , and you can also change the coloring of this screen by long-pressing this screen. There are currently 3 types: a bluish one, a yellowish one, and a

Slightly more flashy one.If you press this camera mark, you will enter camera mode, and of course you can also take pictures using this shutter button. The shooting has started now . If you press it again, it will stop. This E-Pro has a function that allows you to pause during shooting, but you

Can also do it from the remote control. If you press this button, it will stop. Pause It’s currently paused.Press it again to resume.This way, you have almost full control.Even if you want to turn off the power, press and hold to

Turn on the camera. You will be asked whether you want to turn off the power, the remote control, or both, so now you can control everything.If you turn off both, both the remote control and the camera will be turned off, so you can try again from this state.

You can start it up with a long press.You can do everything from turning it off to turning it off without even touching the camera itself.It’s really convenient if you have the camera installed far away. So, here’s how I actually used it. I

Tried running with it attached to my bicycle. At first, I attached it to the handlebar , but this time I attached it to a wristwatch-type holder and tried running. Here’s the video I took. You can attach and edit the dashboard with the app like this.Here is what I exported.I was able to

Export while displaying various data during driving like this.The battery lasts 60 hours on standby. Well, it lasts for 6 hours in the preview state , so it’s pretty long-lasting.It lasts much longer than the main unit’s battery, and I think it’ll last for a day of shooting.So, this is the GPS preview remote.

Next, let’s go with this one.Multi mount Well, it’s like a multi-tripod.It can also be used as a handle, and if you extend it, it will be over 40cm long like this, but it can also be used as a selfie stick, so

Here’s more. You can put out the legs like this, but you can also use it as a tripod, so you can also lift the camera like this in this state.The camera mounting part, uh, the first part at the base is the tripod screw. It

Has a tripod screw that looks like this, and there’s a free luck underneath it , so it can move freely, so this free luck is well made , and there’s a little bit of notch here. This allows the camera to be automatically fixed vertically once you put it in place, and it also

Comes with a mount for this action camera, so you can use it with a variety of action cameras, for example. The goproherro12 also comes with this tripod screw, so you can attach it directly.The secret is that it comes

With a hook like this, so it looks like the wall can be up to 9cm thick. It also allows you to use it by hooking it to any place.It’s a very easy-to-use tripod, but lately

I’ve been using it all the time.If you use it with the S Pro, you can use it with the attached mount for an action camera. You can also attach another quick release mount like this.This is another optional item, but it says it’s a quick release

Mount.It ‘s also quite good, so I thought I’d introduce it to you. This one has a plate for this action camera mount on the bottom like this.It looks like the bottom part of a gopro, so you

Can screw it into something like this, so you can do this quick. The release mand is basically for this Ace Pro.It has a special claw like this, so by locking it, it won’t come off again.It’s extremely solid, but there is some play. This one also

Comes with a rubber plate to fill that gap, so you can adjust it yourself.I think the tighter you make it, the more force it will take to remove it, so I don’t mind it at all even in this state. I use it normally and I

Don’t think it will affect the image, so I’m not concerned about it at all, but if you’re concerned, you can close the gap even more , and you can also add this other plate to this quick release mount. It comes with a plate , so it just has a screw, but

The fact that it fits like this means that if you attach this plate to another camera, you can share this mount, right? GoPro Hero 10 It will appear again , but there is a screw hole here, so if you attach a plate to the GoPro like this

, it will be done in exactly the same way as attaching and detaching the E Pro.I used to use a GoPro, but I bought the AS Pro. Wouldn’t it be nice to have something like that?Next, I

‘d like to go for something a little more plate-based.The first one is this one.It’s like an L-shaped angle , but this one has a claw, so it’s S Pro. There’s a button underneath that you can put it on like this

, and you can easily put it on and take it off like this.What is this? I think that vertical shooting is quite important, but this is a mount that allows you to fix the camera vertically.Of course you can also do it horizontally like this.I

Used to mount it horizontally. It’s a mount that instantly switches from vertical to vertical.If you often shoot vertically, I think it’s a very convenient mount.Furthermore, I’d like to introduce one more plate.This is it. However, this is a plate with a cold shoe mount that has a cold shoe adapter attached,

So how to use it is to fit it into this groove of this cook release mount . I’m going to fit it in like this, and there’s a claw here, and if I press it, I can take it off. It’s a little hard, but I

Think I’ll get used to it, but I’m going to attach it like this, so it’s cold. Since it’s a shoe mount , you can attach whatever accessories you have here.For example, this is Letty’s condenser microphone, so you can attach it here like this .

I’m sure there are some people who think that even if you use something like this, the 3.5mm plug won’t connect, but there is also a microphone adapter like this available as an option . It’s going to be an adapter for use with this.Alright, I’ll show you a little bit about this.This

Is it.I’m going to take off the side cover here.Well, it’s just stuck in there, so it’s easy to remove.Take it out and snap it in there like this. Now, it’s super easy just to connect the microphone. Right now, Letty’s microphone is connected. I

Think you can see this green or blue bar extending here right now . The audio level will now be displayed, so you can see that the external microphone is currently working.As for the microphone level,

There is generally something called external microphone gain in the settings here, so set it here. I did a little test and found that this microphone was just right for me with Pramaise, so let’s try recording some audio.I’m recording audio with a microphone called D, which

Is D4Duo. D4Duo is a very convenient microphone that can pick up sound from behind if you switch it on.This time, I recorded with the microphone inside the camera body.The E Pro’s microphone picks up pretty good sound.If you set it to stereo, it sounds pretty good, but… That would introduce wind noise, so

I’m now in wind noise reduction mode.What about the audio?If you use this microphone adapter, you can record higher quality sound with your own microphone.You can also connect a wireless microphone. Furthermore, there is a USB connector here , so you can use it even when there is an emergency call.It

‘s a really nice item.It’s perfect for Vlog shooting like this . Next up is the item that impressed me the most.It’s a very small item, but it’s called a quick reader.This is also the same as before, with this side cover removed. What it does when you put

It next to it is that half of it has a rubber cover, and this is the USBC terminal, and you can turn it, and when you open it, you’ll see the Lightning terminal, and the rest is here. It also has a microSD card slot,

Which can be covered, so I’ll remove the microSD from the AS Pro and insert it here. It might be okay to have it plugged in, but I’ll start it up in this state . I’m going to start it up with it plugged in. When I do that,

A message that says it’s connected to a quick reader has just appeared here, but a slightly different icon has also appeared here, indicating that it’s connected to a quick reader. If you record in this state, the data will be saved to this external SD card . Stop it. Turn off the power and

Remove it. Remove it. Next time. Well, by rotating this a little bit, I think you can connect it to an iPhone or Android, but you can also connect it to a smartphone with a USB port.I wonder if you can also connect it to an iPad?Then,

Let’s communicate with the quick reader. When I do this with permission, the content I just shot is instantly reflected. Normally, I would have to connect to Wi-Fi and just relax and exchange data, but I use this. This allows you to import the data you just shot at extremely high speed.You

Can also edit the video you just shot, and you can do that really quickly.It’s nice and convenient to be able to do it over Wi-Fi . However, it’s quite bulky, so it’s difficult when you don’t have time, but it’s really convenient.And why does it have a lightning terminal?In fact

, it can also be used with iPhones that have lightning terminals.The same thing can be done. Yes, the communication speed may be slightly different, but I think it’s much faster than using Wi-Fi.Moreover, what’s the point of this laptop’s USBC terminal ? If you start up your computer in this

State, you can use it as a normal card reader, so you can insert the captured data here without taking out the SD card or anything. Once you do this, you can start editing right away.I think it’s quite convenient because you can use it for a variety of things.Also,

What’s included in the case is this:A spare battery. The AS Pro’s battery lasts quite well, but it’s not long enough for one day of use, so I think it’s nice to have a spare battery like this.It’s packed in a case. That’s what I’m really happy about.I introduced quite a lot of accessories, but

Did you all have a favorite accessory?Personally, I felt that this Preview Remote Controller was super convenient.And this quick release controller . You’re the leader. If you have any other accessories that you like, please feel free to write them in the comments section. Thank

You for watching this time. See you in the next video. Goodbye .

Insta360 Ace Pro とAceで使用できるアクセサリーを多数試してみました。
どれもこれもよくできていますが、私のお気に入りはGPSプレビューリモートとQuick Reader です。
劇的にカメラの運用が楽になりますね。

商品提供 Insta360
#Insta360 #Insta360AcePro

以下の販売ページはアフィリエイトリンクを含みます。

公式サイトから購入できます。
年末年始はセールで色々安くなっています
https://store.insta360.com/holiday-sale?insrc=INRDXRX

Insta360 Ace Pro　さすがに新製品なのでセールにはなっていないですが、リンクから購入の場合はスクリーンプロテクター(1750円相当）が付きます！さらに無料でTシャツも
https://www.insta360.com/sal/ace-pro?insrc=INRDXRX

Insta360 X3も安くなっています！＆特典付き
https://www.insta360.com/sal/x3?insrc=INRDXRX

Go3も安い！アクセサリーも付いてお得
https://www.insta360.com/sal/go-3?insrc=INRDXRX

X(TWITTER)でも時々つぶやいています
Tweets by kei5shinohara

X(TWITTER)でも時々つぶやいています
Tweets by kei5shinohara

インスタもよろしくお願いします。
https://www.instagram.com/keiyoutube/

【お仕事のお問い合わせ】
https://funmake.net/promotion/
kei@funmake.net

【お便りの宛先】
お手紙・贈り物などは下記住所へお願い致します。

〒541-0044 大阪府大阪市中央区伏見町3-6-3
三菱UFJ信託銀行大阪ビルMUIC2F
株式会社FunMake (Kei Shinohara宛)

私がいつも使っている機材リスト/gear list
SONY ミラーレス一眼
お勧めaps-cカメラ
ZV-E10
https://amzn.to/3pxlbLA
お勧めフルフレームカメラ
α7 III ボディ ILCE-7M3
https://amzn.to/2Nn2rJJ
α7SM3 ボディ ILCE-7SM3
https://amzn.to/3o13uSd
お勧めレンズ
SONY 単焦点レンズ FE 20mm F1.8 G
https://amzn.to/3DlUNJC
Sigma 24-70mmf2.8 emount
https://amzn.to/3rEVlbs
Tamron 28-75mm F/2.8 Di III VXD G2 ソニーEマウント用（Model A063）
https://amzn.to/3IqSk4b

広告リンクについて
上記の製品URLは一部Amazonアソシエイト・楽天アフィリエイトのリンクを使用しています。